New to RSL for 2023!   We are now manufacturing our own range of PTO woodchippers.  Currently we have 2 sizes in the range, 6 inch and 9 inch.   The chippers features are

• Electric control of the hydraulic infeed
• Automatic infeed control with anti-stall. The infeed rollers will automatically reverse a fraction when the rotor speed slows and will continue to feed when the rotor speed increases.  This system helps to prevent stalling
• Manual speed control of the infeed rollers
• low hopper height for easy manual loading
• 360 degree chute swivel
• Chute flap can be adjusted from ground level
• 540rpm or 1000rpm shaft speed (For larger chip run at 540 RPM)  Adjusting the shaft speed between 540rpm and 1000rpm means you can produce a chip to suit your needs.
• Hopper can be raised for reduced length when travelling or for access in case of blockage
• Dirt door/stone trap below infeed rollers.  The door can be left off if working with dirty wood or if you are loading with a digger and there is a chance of stones